1. Basic introduction
After the whole mobile phone is packed, there are 10 mobile phone boxes in each box, and there is a barcode on the side of each mobile phone box. Take pictures with the camera, identify all the barcodes, and read the weight of the whole box through the serial port. , upload the FCL weight and 10 barcodes to the MES system.
2. Technical parameters
serial number |
project |
index |
Remark |
1 |
Equipment quality |
200KG |
|
2 |
Operation method |
Station operation |
|
3 |
Equipment size |
L688*W650*H1960mm |
|
4 |
camera 1 |
Brand/1400W/12mm |
390*290(mm)/540mm |
5 |
Test object size 1 |
370*245*247 |
Three specifications |
6 |
Test object size 2 |
360*263*339 |
|
7 |
Test object size 3 |
370*243*275 |
|
8 |
Light source size |
600*600 plane light source |
Camera hole in the middle |
9 |
Electronic scale load range |
0-30KG |
|
10 |
Electronic scale accuracy |
1g |
|
11 |
printer size |
L500*W260*H380(mm) |
|
12 |
working desk |
850mm |
can be raised |
13 |
Identify barcode |
1D barcode |
About 5cm in length |
3. Instructions for use
1. Turn on the power of the device, open the GOI software, adjust the light source and enter the state to be detected.
2. After the equipment is packed, manually place the DUT on the equipment carrier.
3. Press the test button to perform a weighing test and visual surface test.
4. If the processing result is NG, the horn will alarm, manually remove the product to be tested or re-test.
5. If the processing result is GOOD, the system will automatically output the barcode and weight to the MES system, and then the printer will print the barcode information.
6. Manually paste the barcode to the carton. After the pasting is completed, place the product on the equipment carrier again, and press the "Compare button" to judge whether it is correct.
7. If correct, the test is complete.