Low-Voltage Cable Tester
Keywords:
Category:
CT Cable Tester
Product accessories:
Helpline:
Low-Voltage Cable Tester
1. Test Subjects
Cables, wire harnesses, backplanes, and related components such as resistors, capacitors, diodes, and more
II. Test Items
Tests for continuity, impedance, capacitance, PN junctions, and more
3. Product Features
● Simplified Chinese WINDOWS Software interface, easy to use
● Quickly connect or replace the cable under test using adapter cables or an adapter box, ideal for testing multiple cable types in high-volume production.
● Equipped with a self-learning function, it quickly identifies unknown wiring connections in sample lines, making editing effortless and eliminating the need for manual input of wiring relationships. Trouble
● Equipped with auxiliary assembly functionality, it can quickly locate the test points contacted by the probe through rapid on-off scanning, and then display the corresponding core. Line assembly location. Significantly improves assembly speed, Reduce the core wire marking process
● Features system verification functionality: Checks and calibrates the signal source, detects system capacitance, and eliminates the effects of distributed parameters.
● Features a system self-check function: automatically tests the internal signal sources, A/D、D/A , channel plates to ensure machine operation Reliable and with accurate test results
● 256 Point / Instantaneous on-off test that quickly displays the connection status and automatically identifies and highlights the fault point.
● Automated grouping, arrangement, and short-circuit testing identifies all potential short-circuit errors (such as misconnections or multiple connections).
● Program-controlled automated testing process allows for multiple inspections of product cables at any time, facilitating quality management and significantly boosting work efficiency. Rate
● Four-wire test method for precise resistance measurement, detecting even minute changes in contact resistance and identifying issues such as poor contact or broken strands in wire cores. Quality risks such as improperly connected parallel lines
● Rapidly tests insulation between any two core wires / Withstand voltage testing reveals all potential insulation defects and overvoltage issues. Flow and other defects
● Boost delay: Voltage from 0V Gradually increase to the set output, eliminating the influence of distributed parameters while accommodating significant variations in these parameters. Cable testing (including shielded cables, extra-long cables, twisted-pair cables, etc.)
● Test results can be statistically analyzed and stored or printed.
● Password-protected operator settings / Engineers have multi-level access permissions, making operation management, quality control, and safety management more convenient.
4. Technical Specifications
1. Number of test points
Switchboard: 128 points per unit, maximum: 12,800 points
2. Test Voltage
DC Source: Voltage < – 5V ~ + 5V , current < 10mA
AC Source: Amplitude 0.125–10 Vpp, Sine Wave, 10 Hz–5 MHz
3. Test Content
a) Conductivity test, test speed: 500 points < 1 second
b) Component Testing
Two-wire resistance test: 1Ω to 10MΩ, accuracy ±(8% + 0.5Ω)
Four-wire low-resistance test: 1Ω to 1kΩ, accuracy ±(1% + 0.005Ω)
Capacitance test: 1 nF to 100 μF, accuracy ±(10%)
Previous page
Next page
Previous page
Next page