5G Device Appearance Inspector

Keywords:

天线振子、滤波器、环形器、5G、基站

Category:

Semiconductor Industry

Product accessories:

Helpline:

4008198001

5G Device Appearance Inspector

Holding Hands with 5G

5G The base station is 5G The Internet The core equipment provides wireless coverage, enabling wireless signal transmission between the wired communication network and wireless devices.

Antenna elements, filters, circulators, and circuit boards are key components of base stations. In 2018, Star River Technology launched related visual inspection equipment capable of detecting Of the circulator PIN Misaligned needles, distance measurement, weld point detection, flatness inspection, QR code reading, MES – Flatness inspection, residual adhesive detection; capable of measuring the filter’s dimensions, flatness, height, and concentricity. ; It can perform appearance defect detection, electrical performance testing, and weighing; it can also measure antenna element line width, check for broken wires, and detect surface defects. QR code scanning, MES Wait a minute.

The General Optical Inspection (GOI) platform, a comprehensive machine vision solution pioneered by Galaxy Technology, is designed to meet diverse inspection needs. Paired with Galaxy Technology’s functional testing cards, GOI enables scalable functionality, delivering a seamless, all-in-one solution tailored to customer requirements. Additionally, it integrates effortlessly with users’ existing data management systems—such as MIS, ASP, and ARP—enabling real-time data transmission, secure communication, and enhanced product traceability and process monitoring. The platform also supports bidirectional communication with automated equipment like robotic arms and PLCs, paving the way for fully autonomous, unmanned inspection processes in production lines.

I. Product Name: 5G Device Tester (Illustration shown uses circulator testing as an example)

II. Product Dimensions: 1900 (L) × 1300 (W) × 1700 (H)

III. Performance, Features

1 ．Flatness/Needle Position/Residual Adhesive Detection

Detection principle:

⑴ Checking for PIN skewness: Measure the distances between each pair of three PIN pins, as well as the distance from each PIN pin to the center of the bottom circle, with a precision tolerance of ±0.08 mm.

(2) Flatness Inspection: This test checks the height error between the three PINs and the reference plane. A product is considered good if the difference in height of its three PIN pins relative to the reference plane is within ±0.08 mm; otherwise, it’s classified as defective.

⑶ Residue Detection: Capture mid-angle and low-angle images, use a sliding window to precisely locate residual adhesive areas, and then perform judgment by comparing binarized images.

2 ．Tape-and-reel machine barcode scanning/angle orientation detection

Detection principle:

⑴ Scan the code: Scan the QR code and upload the data to the MES system, which then determines whether mixed work orders and mixed processes are involved.

(2) Product Orientation Detection: The product has three orientation directions. If placed at the wrong 120° angle, an error will be triggered. Additionally, the system can also detect whether the label is applied at an angle—detecting misalignment with an accuracy of ±20°.

3 High-voltage testing

Detection principle:

High-Voltage Testing: After the high-voltage equipment completes product testing, GOI reads the high-voltage test results. GOI then scans the barcode, matches the high-voltage results with the scanned data, and uploads the combined information to the MES system, which determines whether the product has passed inspection.

4 ．Weld Joint Inspection