Weld Joint Detector
Keywords:
Category:
UV Glue Spray Detection
Product accessories:
Helpline:
Weld Joint Detector
I. Purpose of the Equipment
This device is used for circuit boards. 12 Layout assembly /6 Layout Assembly) Weld Joint Quality Inspection
II. Equipment Functions
1 The equipment enables online transfer (requiring seamless integration with preceding and subsequent processes), and its track width and camera can be adjusted according to the customer’s product. It also features automatic receiving, conveying, and positioning functions.
2 The equipment can identify, detect, diagnose, and mark defective parts according to the customer’s fault criteria.
3 • The equipment meets all size specifications PCB Switching between panels occurs seamlessly, with a switching time of ≤ 5 Minutes.
3. Workflow:
1 Once the initialization process is complete, the product begins to flow through the equipment. As it moves into position, it triggers the photoelectric sensor.
2 At this moment, all the lights are turned on, GOI After the software reads the position signal, it begins waiting for the test.
3 The product continues moving forward until it reaches the photoelectric sensing position. PLC Trigger the camera to take a photo.
4 After the photo session is over, GOI Read the image from the camera and begin processing.
5 Once processing is complete, upon the product's arrival NG Workstation photoelectric previously issued GOOD/NG The result.
6 At this point, the light source delay time has elapsed—turn off the light.
7 When the product moves to NG Workstation photoelectric position, if it is NG , the robotic arm activates, lifting NG Capture the product; if it is GOOD, Then continue moving downstream.
4. Equipment Dimensions
L900*W800*H1250
Previous page